Your options for bike set-up to make climbing mountains a doddle

If you find yourself wishing you had a smaller, easier-to-turn gear to take the pain out of riding uphill, there are several ways you can alter your bike to make things simpler.

Follow our advice and you'll soon be spinning up the climbs, and you might even learn to love them!

For this article we’re assuming that you have a bike with derailleur gears rather than hub gears.

Bike gear basics

If you have a typical derailleur setup on a bike designed for the road, the chances are that you have two (possibly one or three) chainrings on the chainset (at the front), and somewhere between eight and eleven sprockets on the rear wheel, in what's usually called a cassette or cluster.

The size of the gear is determined by the chainring and sprocket combination that you use. Running the chain on the larger chainring gives you a larger (harder) gear that moves you further forward with every pedal revolution, as does running the chain on a smaller sprocket.

That’s simple, right?

But what if you’re running the chain on the smaller chainring and the largest sprocket and the gear is still too hard? You can work on your fitness, of course, but you can also make changes to your equipment.

Changing your cassette

Cassettes come with various different combinations of sprockets. We’ll take Shimano’s 105 groupset as an example. Shimano offers a 105 cassette with an 11-tooth sprocket up to a 28-tooth sprocket – often written as 11-28T. It also offers a 12-25T cassette and a wide-range 11-32T cassette.

All other things being equal, the 32T sprocket on the 11-32T cassette is going to give you the easiest gear. If your bike is currently fitted with an 11-28T cassette, switching to an 11-32T cassette will make climbing less of a struggle.

Swapping one cassette for another is a straightforward job but you do need special tools: a cassette tool and a chain whip. If you don’t have these, you can ask a bike shop to do the job for you.

>>Read more: How to fit and remove a sprocket cassette

An 11-32 Shimano 105 cassette currently costs £30.99.


SRAM kicked off the use of double chainsets and super-wide-range cassettes a few years ago with its WiFLi designs, which allow the use of an 11-36 cassette for a super-low bottom gear. Shimano only goes to 11-32 with its road components, but there are reports of people getting SRAM 11-36 cassettes to work in Shimano systems.

If you have a Campagnolo system, then for most groupsets you are limited to a 29-tooth sprocket. However, the Potenza groupset launched in March 2016 offers an 11-32 cassette so Italophiles can also get low gears.

Rear derailleur capacity

If you change your cassette, you need to bear in mind the maximum capacity of your rear derailleur. This is the difference in chainring and sprocket sizes that it can handle.

Say you have 50-tooth and 34-tooth chainrings: the difference between the large one and the small one (50 - 34) is 16 teeth. And say your bike is fitted with an 11-28T cassette: the difference between the large one and the small one (28 - 11) is 17 teeth. Add them together and you get a total difference (16 + 17) of 33 teeth.

Shimano’s short cage 105 rear derailleur has a total capacity of 33 teeth. That means you can use it with the setup described above. But you can’t use that rear derailleur with the same chainset and an 11-32T cassette because the total difference would be 37 teeth, so either the chain would be too slack in the combination of smallest chainring and smallest sprocket or too tight in the largest. That can cause the transmission to jam or even break.

Shimano mid cage rear mech.jpg

If you wanted to fit an 11-32 cassette, you’d also need Shimano’s mid-cage rear derailleur (the 105 version retails at £34.49) which has a total capacity of 37T.

You’d also need to fit a longer chain (the Shimano 105 one retails at £15.99).

Swapping your chainset

If you’re on a road bike you’ll probably have a double chainset, that is, a chainset with two chainrings. There are three common double chainring combinations: a 52 or 53-tooth outer chainring with a 39-tooth inner chainring; a 50/34T pairing, known as a compact or a semi-compact 52/36T.

If you have a 53/39T setup, for example, and you find the gearing too hard, you can buy a 50/34T chainset or fit smaller chainrings to your existing cranks (check that the new chainrings have the same bolt circle diameter, BCD, as the old ones).

Shimano 105 53-39 chainset.jpg

You’ll also have to alter the position of your front mech and get yourself a new chain (or at least shorten your existing chain).

Like rear derailleurs, front derailleurs have a maximum capacity. Here it relates to the difference in size between the large chainring and the small chainring. So, say you are using 50/34T chainrings: the difference is 16 teeth.

The capacity of a Shimano 105 front derailleur, for example, is 16T so it’ll cover all of the common double chainset combinations.

Going for a triple chainset

One final option for changing your gearing is to swap from a double chainset to a triple chainset. A typical triple setup for the road has a 30T inner chainring compared with the 34T inner chainring of a compact setup.

Shimano Tiagra triple chainset.jpg

However, this is quite a complicated swap. You'd need to change your shifters, your chainset and probably your derailleurs too. You’re far better off buying a bike that’s already set up with a triple rather than swapping to it.

Over the past few years, the introduction of cassettes and rear mechs that provide a super-wide range of gears has meant that triple chainsets have largely fallen out of favour for road use. That said, some people get on well with triples; it comes down to personal taste.

Good luck out there on the climbs! 

Mat has worked for loads of bike magazines over 20+ years, and been editor of 220 Triathlon and Cycling Plus. He's been road.cc technical editor for eight years, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. We send him off around the world to get all the news from launches and shows too. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a past winner of the Cycling Media Award for Specialist Online Writer.